Home/EV Chargers

EV Chargers

EV charging hardware, from the garage to the depot.

Level 2 charging that installs in an afternoon and DC fast charging that turns a parking space into a revenue line. Every 565 Energy charger meters its own energy, takes firmware updates over the air and plays well with open back-office software.

Up to 11.5 kW

48 A continuous on the hardwired models — enough to fully replenish most daily commutes in under two hours.

Meters every session

Built-in energy measurement means you can bill a tenant, reimburse a driver or simply know what charging costs you.

Load aware

Dynamic load management sheds charging current when the rest of the building needs it, which often avoids a service upgrade entirely.

Open protocols

OCPP 1.6J on the commercial units. Use our portal or bring your own network operator — the hardware does not care.

The lineup

Pick the charger that fits the circuit.

565 Pulse 40

PULSE-40

565 Pulse 40

The everyday Level 2 charger. Plugs into a NEMA 14‑50 outlet, adds roughly 30 miles of range per hour, and schedules itself around your utility's off-peak window.

Output
9.6 kW
Current
40 A adjustable
Connector
J1772
Cable
25 ft
Install
Plug-in 14-50
Enclosure
Outdoor rated
  • Wi-Fi + app
  • Energy metering
  • Adjustable 16–40 A
  • NACS adapter included
565 Pulse 48

PULSE-48

565 Pulse 48

Hardwired and faster. 48 A continuous on a 60 A circuit for vehicles that can take it, with built-in load management so the charger backs off instead of tripping the main.

Output
11.5 kW
Current
48 A adjustable
Connector
J1772
Cable
25 ft
Install
Hardwired
Enclosure
Outdoor rated
  • Dynamic load management
  • Wi-Fi + Ethernet
  • Revenue-grade metering option
  • Firmware over the air
565 Pulse Duo

PULSE-DUO

565 Pulse Duo

Two ports, one circuit. The Duo shares up to 48 A between two vehicles automatically, which is how you double a parking lot's charging capacity without a new service.

Ports
2 × J1772
Output
11.5 kW shared
Mounting
Wall or pedestal
Access
RFID + app
Back-office
OCPP 1.6J
Cable
2 × 18 ft
  • Power sharing
  • Driver authentication
  • Session reporting
  • Pedestal kit available
565 Surge DC30

SURGE-DC30

565 Surge DC30

DC fast charging for depots, dealerships and retail sites where dwell time is measured in minutes, not hours. Dual standard cables, liquid-free thermal design.

Output
30 kW DC
Connectors
CCS1 + NACS
Voltage range
200–1000 V DC
Input
480 V 3-phase
Back-office
OCPP 1.6J
Payment
Card reader ready
  • ~45 min to 80% (60 kWh pack)
  • Dual cable
  • Remote diagnostics
  • Site-load aware

Side by side

Charger comparison

ModelOutputCurrentPortsInstallBest for
565 Pulse 409.6 kW40 A1Plug-in 14-50Homes and ADUs
565 Pulse 4811.5 kW48 A1HardwiredHomes with big battery EVs, small business
565 Pulse Duo11.5 kW shared48 A2HardwiredWorkplaces, multifamily, lots
565 Surge DC3030 kW DC2 cables480 V 3-phaseFleet depots, retail, dealerships

Not sure which circuit you have to work with? Install a 565 Sense monitor first — two weeks of real load data will tell you whether the panel supports 48 A or whether load management is the smarter answer.

Installation

Straightforward for the electrician.

Nothing exotic. Standard knockouts, generous wiring compartments, a mounting bracket that holds the unit while the terminations are made, and commissioning that finishes in the app instead of a laptop and a serial cable.

  • Plug-in or hardwired depending on the model and local code
  • Wiring compartment sized for 6 AWG copper with room to work
  • Bracket-first mounting — hang it, then terminate
  • App commissioning for current limit, network and schedules
  • Outdoor rated enclosure with a −30°C to 50°C operating range
565 Energy Level 2 EV charger

Charging a fleet, a lot or a building?

Send us the site plan and the service size. We will lay out the ports, the load management strategy and the bill of materials.